The hydraulic aluminum can baler press machine can squeeze all kinds of metal scraps, such as steel shavings, scrap steel, scrap aluminum, metal beverage cans, scrap copper, scrap stainless steel, and scrap car scraps into various shapes such as cuboid, octagon, cylinder, etc.
The use of aluminum can balers to squeeze scrap metal fragments can reduce their transportation and smelting costs, and can also increase the speed of putting these metal scraps into the furnace.
As the small and medium-sized industrial equipment, the aluminum can baler must master the correct operation plan for its operation and maintenance, and also understand some common problems in the operation process.
Notes for operating aluminum can baler press machine correctly
First of all, when using the aluminum can baler machine, users should pay attention to some matters when using electrical components. When repairing and adjusting the baler, be sure to turn off the power switch.
There is a risk of electric shock when you touch the electronic control box and transformer with your hands when you unplug the power plug and turn on the power. In addition, if the outer insulation of the wire is damaged, it should be repaired in time to avoid contact with the body and cause electric shock.
Secondly, when the heater of the metal baler is in a high-temperature state (approximately 230°C), if you touch it directly with your hands, you will get burned. Therefore, we need to turn off the power of the machine and let it cool down for a period of time to return to normal temperature before repairing and maintaining it.
Third, during the operation of the aluminum can baler press machine, it is forbidden to put your hands or head into the main structure of the machine. If you put your head or hands into the structure of the machine, it will cause damage to your body from the baler machine.