{"id":4478,"date":"2026-08-11T11:31:56","date_gmt":"2026-08-11T03:31:56","guid":{"rendered":"https:\/\/www.baler-machines.com\/?post_type=product&#038;p=4478"},"modified":"2026-08-11T11:32:25","modified_gmt":"2026-08-11T03:32:25","slug":"rebar-cutting-machine","status":"publish","type":"product","link":"https:\/\/www.baler-machines.com\/ru\/rebar-cutting-machine\/","title":{"rendered":"Rebar Cutting Machine"},"content":{"rendered":"<p class=\"wp-block-paragraph translation-block\">Shuliy <strong>rebar cutting machine<\/strong> is a high-torque mechanical shearing tool that cuts rebar, threaded rebar, round bar, and angle iron to specified lengths. Marketed under several names\u2014steel bar cutter, rebar cutter machine, heavy-duty rebar cutter\u2014it serves both site work and rebar processing plants. <\/p>    <p class=\"wp-block-paragraph translation-block\">Our GQ series ships in 8 variants covering <strong>4-50 mm rebar<\/strong> and <strong>30\u00d730-80\u00d780 mm angle iron<\/strong>, all running at <strong>32 cuts per minute<\/strong> on 3-phase 380V power. The flywheel-and-clutch drive eliminates hydraulic complexity, making this an industrial rebar cutter machine that is lower-maintenance than hydraulic rebar cutters and CNC automatic ones of similar capacity.<\/p>    <p class=\"wp-block-paragraph\">This pillar guide covers the 8 GQ models, three design features that set them apart from low-cost steel bar cutters, compatible materials, applications, and pricing. <\/p>    <p class=\"wp-block-paragraph\">Whether you need a basic electric rebar cutter for site work, a 50 mm heavy-duty rebar cutter for bored piles, a straight-thread steel bar cutting machine for splice systems, or an angle iron cutting machine for structural steel fabrication, the sections below provide the data to choose.<\/p>    <figure class=\"wp-block-embed is-type-video is-provider-youtube wp-block-embed-youtube wp-embed-aspect-16-9 wp-has-aspect-ratio\"><div class=\"wp-block-embed__wrapper\"> <iframe loading=\"lazy\" title=\"Rebar Cutting Machine Working Video | Powerful Scrap Steel Recycling Machine for Metal Processing\" width=\"500\" height=\"281\" src=\"https:\/\/www.youtube.com\/embed\/cLlGM_AFkmU?feature=oembed\" frameborder=\"0\" allow=\"accelerometer; autoplay; clipboard-write; encrypted-media; gyroscope; picture-in-picture; web-share\" referrerpolicy=\"strict-origin-when-cross-origin\" allowfullscreen><\/iframe> <\/div><figcaption class=\"wp-element-caption\">video of heavy-duty rebar cutter<\/figcaption><\/figure>    <h2 class=\"wp-block-heading\"><strong>Why Construction Sites and Rebar Plants Choose a Mechanical Rebar Cutter<\/strong><\/h2>    <p class=\"wp-block-paragraph\">Standard rebar cutting machines handle two core jobs: cutting rebar to length on the job site, and pre-cutting stock for stirrup, cage, and pile cap production in a rebar processing plant. The GQ series\u2014also called a rebar cutter, round bar cutting machine, or angle steel cutter\u2014handles both:<\/p>    <ul class=\"wp-block-list\"> <li><strong>On-site rebar cutting<\/strong> for 6-32 mm bar in beam, column, and slab work<\/li>    <li><strong>Plant pre-cutting<\/strong> feeding a <a href=\"https:\/\/www.baler-machines.com\/ru\/rebar-straightening-machine\/\">\u0423\u043f\u0440\u0430\u0432\u043b\u0435\u043d\u0438\u0435 \u043f\u043e \u0432\u044b\u043f\u0440\u044f\u043c\u0435\u043d\u0438\u044e<\/a> \u0438\u043b\u0438 <a href=\"https:\/\/www.baler-machines.com\/ru\/rebar-arc-bending-machine\/\">rebar arc bending machine<\/a> line with 6-12 m stock cut into 1-2 m sections<\/li>    <li><strong>Threaded rebar cutting<\/strong> for mechanical splice coupling<\/li>    <li><strong>Bridge and tunnel stock pre-cutting<\/strong> for 32-50 mm rebar used in bored pile and diaphragm wall cages<\/li>    <li><strong>Angle iron and channel steel cutting<\/strong> via the GQ40 Angle Iron variant, which handles 30\u00d730-80\u00d780 mm angle at 32 cuts\/min<\/li>    <li><strong>Scrap yard reduction<\/strong> cutting 1-6 m scrap rebar to 0.5-1 m lengths before <a href=\"https:\/\/www.baler-machines.com\/ru\/scrap-rebar-granulator\/\">scrap rebar granulator<\/a> or baler feed<\/li> <\/ul>    <p class=\"wp-block-paragraph\">All 8 GQ models share three design features that separate them from low-cost steel bar cutters:<\/p>    <ul class=\"wp-block-list\"> <li><strong>26 mm-thick, high-strength blade<\/strong>: Cr12MoV tool steel, through-hardened to HRC 58-62. The extra thickness lets one stroke shear multiple bars at once (e.g., 3\u00d7 12 mm or 2\u00d7 16 mm), halving cycle time versus single-bar rebar cutters.<\/li>    <li><strong>Enlarged, thickened flywheel<\/strong>: The flywheel stores motor energy and releases it in a single shearing stroke. Mass is matched to motor output\u20142.2 kW for GQ40, 3 kW for GQ42\/GQ45, 4 kW for GQ50, and 5.5 kW for GQ60. Cutting 32-50 mm rebar becomes effortless: the operator presses the foot pedal, the clutch engages, and the flywheel delivers full cutting force in under 0.5 seconds.<\/li>    <li><strong>New-style spring mount<\/strong>: A compression spring on the cutting arm absorbs inertial impact when the blade strikes the rebar. This keeps the cut face flat (no bent ends), extends blade life 30-50% over rigid-arm designs, and reduces operator fatigue on long shifts. A rigid-arm steel bar cutter cracks blades within 6 months on 32 mm rebar; the spring-mounted design runs 12+ months on the same workload.<\/li> <\/ul>    <figure class=\"wp-block-gallery has-nested-images columns-default is-cropped wp-block-gallery-1 is-layout-flex wp-block-gallery-is-layout-flex\"> <figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"678\" height=\"720\" data-id=\"4481\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/thickened-high-strength-blade-for-rebar-cutting.webp\" alt=\"thickened, high-strength blade for rebar cutting\" class=\"wp-image-4481\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/thickened-high-strength-blade-for-rebar-cutting.webp 678w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/thickened-high-strength-blade-for-rebar-cutting-11x12.webp 11w\" sizes=\"auto, (max-width: 678px) 100vw, 678px\" \/><figcaption class=\"wp-element-caption\">Thickened, High-Strength Blade For Rebar Cutting<\/figcaption><\/figure>    <figure class=\"wp-block-image size-large\"><img loading=\"lazy\" decoding=\"async\" width=\"713\" height=\"720\" data-id=\"4482\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/flywheel-used-for-steel-bar-cutting.webp\" alt=\"flywheel used for steel bar cutting\" class=\"wp-image-4482\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/flywheel-used-for-steel-bar-cutting.webp 713w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/flywheel-used-for-steel-bar-cutting-12x12.webp 12w\" sizes=\"auto, (max-width: 713px) 100vw, 713px\" \/><figcaption class=\"wp-element-caption\">Flywheel Used For Steel Bar Cutting<\/figcaption><\/figure>    <figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"674\" height=\"720\" data-id=\"4484\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/heavy-duty-rebar-cutter-new-type-spring-mount.webp\" alt=\"\" class=\"wp-image-4484\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/heavy-duty-rebar-cutter-new-type-spring-mount.webp 674w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/heavy-duty-rebar-cutter-new-type-spring-mount-11x12.webp 11w\" sizes=\"auto, (max-width: 674px) 100vw, 674px\" \/><figcaption class=\"wp-element-caption\">Thickened, High-Strength Blade For Rebar Cutting<\/figcaption><\/figure> <\/figure>    <h2 class=\"wp-block-heading\"><strong>GQ Series <strong>Rebar Cutting Machin<\/strong>e Specifications (8 Models)<\/strong><\/h2>    <p class=\"wp-block-paragraph\">All 8 GQ variants are listed below. Each runs at 32 cuts per minute on 3-phase 380V power and shares the same flywheel-clutch platform.<\/p>    <figure class=\"wp-block-table\"><table><tbody><tr><td><strong>\u041c\u043e\u0434\u0435\u043b\u044c<\/strong><\/td><td><strong>Round Bar Max<\/strong><\/td><td><strong>Rebar (Threaded) Max<\/strong><\/td><td><strong>Motor Power<\/strong><\/td><td><strong>Size (mm)<\/strong><\/td><td><strong>\u041c\u0430\u0441\u0441\u0430<\/strong><\/td><td><strong>\u041f\u0440\u0438\u043c\u0435\u0447\u0430\u043d\u0438\u044f<\/strong><\/td><\/tr><tr><td>GQ40 (Angle Iron)<\/td><td>\u2014<\/td><td>\u2014<\/td><td>2.2 kW<\/td><td>1150\u00d7450\u00d7500<\/td><td>280 kg<\/td><td>Angle iron 30\u00d730-80\u00d780 mm; blade 83\u00d783\u00d716 mm<\/td><\/tr><tr><td>GQ40<\/td><td>\u226428 mm<\/td><td>\u226425 mm<\/td><td>2.2 kW (national-standard copper)<\/td><td>1150\u00d7450\u00d7500<\/td><td>280 kg<\/td><td>Standard site cutter<\/td><\/tr><tr><td>GQ42<\/td><td>&lt;36 mm<\/td><td>\u226432 mm<\/td><td>3 kW<\/td><td>1300\u00d7450\u00d7500<\/td><td>360 kg<\/td><td>Mid-size site\/plant cutter<\/td><\/tr><tr><td>GQ45 (Heavy-Duty)<\/td><td>&lt;36 mm<\/td><td>\u226432 mm<\/td><td>3 kW<\/td><td>1300\u00d7450\u00d7500<\/td><td>390 kg<\/td><td>30 kg heavier than GQ42; reinforced body<\/td><\/tr><tr><td>GQ45 (Straight-Thread)<\/td><td>&lt;36 mm<\/td><td>\u226436 mm (threaded)<\/td><td>3 kW<\/td><td>1300\u00d7450\u00d7500<\/td><td>410 kg<\/td><td>Special die for straight-thread rebar<\/td><\/tr><tr><td>GQ50<\/td><td>&lt;42 mm<\/td><td>\u226440 mm<\/td><td>4 kW<\/td><td>1450\u00d7450\u00d7550<\/td><td>510 kg<\/td><td>Heavy civil works cutter<\/td><\/tr><tr><td>GQ50 (Straight-Thread)<\/td><td>\u226442 mm<\/td><td>\u226440 mm (threaded)<\/td><td>4 kW<\/td><td>1450\u00d7450\u00d7550<\/td><td>530 kg<\/td><td>For threaded rebar splice systems<\/td><\/tr><tr><td>GQ60 (Heavy-Duty)<\/td><td>&lt;55 mm<\/td><td>\u226450 mm<\/td><td>5.5 kW (national-standard copper)<\/td><td>1650\u00d7600\u00d7900<\/td><td>880 kg<\/td><td>Bored pile\/diaphragm wall cutter<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">GQ series heavy-duty rebar cutter machine specifications for all 8 models<\/figcaption><\/figure>    <p class=\"wp-block-paragraph translation-block\"><strong>Common Specifications (all 8 models):<\/strong><\/p>    <ul class=\"wp-block-list\"> <li>Cutting speed: 32 cuts\/min continuous cycle<\/li>    <li>Input voltage: 3-phase 380V \/ 50Hz (220V\/415V\/480V optional)<\/li>    <li>Drive: Flywheel + single-plate clutch + cam-actuated blade<\/li>    <li>Blade: Cr12MoV tool steel, HRC 58-62, 26 mm thickness<\/li>    <li>Operation: Manual feed + foot-pedal cycle start<\/li>    <li>Mounting: Free-standing on level concrete; GQ60 requires four M16 anchor bolts<\/li> <\/ul>   <div class=\"wp-block-image\"> <figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"720\" height=\"648\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/heavy-duty-rebar-cutting-machine-for-construction.webp\" alt=\"heavy-duty rebar cutting machine for construction\" class=\"wp-image-4486\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/heavy-duty-rebar-cutting-machine-for-construction.webp 720w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/heavy-duty-rebar-cutting-machine-for-construction-13x12.webp 13w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><figcaption class=\"wp-element-caption\">heavy-duty rebar cutting machine for construction<\/figcaption><\/figure> <\/div>   <h2 class=\"wp-block-heading\"><strong>Materials a Rebar Cutting Machine Can Process (Rebar, Round Bar, Angle Iron, Threaded Bar)<\/strong><\/h2>    <p class=\"wp-block-paragraph\">The GQ series also works as a cutting machine for round bar, angle iron, and deformed bar. It cuts five material categories used in construction and metal processing:<\/p>    <figure class=\"wp-block-table\"><table><tbody><tr><td><strong>Material Type<\/strong><\/td><td><strong>Diameter \/ Size Range<\/strong><\/td><td><strong>Common Grades<\/strong><\/td><td><strong>Recommended GQ Model<\/strong><\/td><\/tr><tr><td><strong>Round bar (mild steel)<\/strong><\/td><td>\u226455 mm<\/td><td>Q235, SS400, A36<\/td><td>GQ40-GQ60 by diameter<\/td><\/tr><tr><td><strong>Deformed rebar (HRB)<\/strong><\/td><td>\u226450 mm<\/td><td>HRB400, HRB500, B500B<\/td><td>GQ40-GQ60 by diameter<\/td><\/tr><tr><td><strong>Threaded rebar (straight-thread splice)<\/strong><\/td><td>\u226440 mm<\/td><td>PSB500, PSB785<\/td><td>GQ45 or GQ50 straight-thread variant<\/td><\/tr><tr><td><strong>Angle iron (equal-leg)<\/strong><\/td><td>30\u00d730-80\u00d780 mm<\/td><td>Q235, Q345<\/td><td>GQ40 (Angle Iron)<\/td><\/tr><tr><td><strong>Channel steel \/ flat bar<\/strong><\/td><td>30-80 mm width<\/td><td>Q235, Q345<\/td><td>GQ50-GQ60 with optional die<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">Materials compatible with the steel bar cutting machine<\/figcaption><\/figure>    <div class=\"wp-block-columns is-layout-flex wp-container-core-columns-is-layout-8f761849 wp-block-columns-is-layout-flex\"> <div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"> <figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"720\" height=\"350\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/straight-blade-for-different-steel-cutting.webp\" alt=\"straight blade for different steel cutting\" class=\"wp-image-4490\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/straight-blade-for-different-steel-cutting.webp 720w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/straight-blade-for-different-steel-cutting-18x9.webp 18w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><figcaption class=\"wp-element-caption\">Straight Blade For Different Steel Cutting<\/figcaption><\/figure> <\/div>    <div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"> <figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"720\" height=\"350\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/circular-blade-for-ends.webp\" alt=\"circular blade for ends\" class=\"wp-image-4491\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/circular-blade-for-ends.webp 720w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/circular-blade-for-ends-18x9.webp 18w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><figcaption class=\"wp-element-caption\">Circular Blade For Ends<\/figcaption><\/figure> <\/div>    <div class=\"wp-block-column is-layout-flow wp-block-column-is-layout-flow\"> <figure class=\"wp-block-image size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"720\" height=\"350\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/angle-iron-blade-for-angle-steel.webp\" alt=\"angle-iron blade for angle steel\" class=\"wp-image-4492\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/angle-iron-blade-for-angle-steel.webp 720w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/angle-iron-blade-for-angle-steel-18x9.webp 18w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><figcaption class=\"wp-element-caption\">Angle-Iron Blade For Angle Steel<\/figcaption><\/figure> <\/div> <\/div>    <p class=\"wp-block-paragraph\">The flywheel-clutch design works best with solid bar stock and rebar. Thin-wall steel pipe (under 2 mm wall) may crush rather than shear cleanly; use a dedicated tube cutter instead. For threaded rebar splice systems, the GQ45 and GQ50 straight-thread variants use a custom die that grips the thread profile without stripping the ribs during cutting.<\/p>    <h2 class=\"wp-block-heading\"><strong>Common Applications of Steel Bar Cutting Machine for Construction<\/strong><\/h2>    <p class=\"wp-block-paragraph\">A rebar cutting machine appears on virtually every reinforced concrete project. Here are six common uses, matched to the right GQ model:<\/p>    <ul class=\"wp-block-list\"> <li><strong>High-rise site cutting<\/strong>: GQ40 or GQ42 sits beside the <a href=\"https:\/\/www.baler-machines.com\/ru\/rebar-arc-bending-machine\/\">rebar arc bender<\/a> on each floor. At 280-360 kg, two workers can move it; 32 cuts\/min keeps pace with two benders.<\/li>    <li><strong>Bridge deck and pier prep<\/strong>: GQ45 or GQ50 with 32-40 mm capacity handles pier cage longitudinal bars and bridge deck transverse bars at 1,500-1,800 cuts per 8-hour shift.<\/li>    <li><strong>Bored pile and diaphragm wall cages<\/strong>: GQ60 heavy-duty cuts 50 mm rebar for pile cage hoops and main bars. The 880 kg, 5.5 kW unit is anchor-bolted to the foundation; common in metro and high-speed rail work.<\/li>    <li><strong>Threaded rebar splice lines<\/strong>: GQ45 or GQ50 straight-thread pre-cuts rebar to length before the threading machine\u2014required for HRB500E seismic-grade splice systems in column and beam joints.<\/li>    <li><strong>Steel structure fabrication<\/strong>: GQ40 (Angle Iron) cuts braces, gusset plates, and connector plates at 32 cuts\/min, replacing a bandsaw for 30\u00d730-80\u00d780 mm angle in many shops.<\/li>    <li><strong>Scrap yard sizing<\/strong>: GQ50 or GQ60 reduces 1-6 m scrap rebar to 0.5-1 m lengths before scrap rebar granulator feed or baler compaction\u2014double the throughput of hand torching.<\/li> <\/ul>    <h2 class=\"wp-block-heading\"><strong>How to Choose the Right Rebar Cutter (Manual, Electric, Hydraulic, Automatic)<\/strong><\/h2>    <p class=\"wp-block-paragraph\">Four reabr cutter types compete in the same capacity range. The table below matches each to its best-fit use:<\/p>    <figure class=\"wp-block-table\"><table><tbody><tr><td><strong>\u0422\u0438\u043f<\/strong><\/td><td><strong>Drive<\/strong><\/td><td><strong>\u0415\u043c\u043a\u043e\u0441\u0442\u044c<\/strong><\/td><td><strong>\u041c\u0430\u0441\u0441\u0430<\/strong><\/td><td><strong>Best For<\/strong><\/td><td><strong>Trade-Off<\/strong><\/td><\/tr><tr><td><strong>Manual rebar cutter<\/strong><\/td><td>Hand lever \/ hydraulic hand pump<\/td><td>\u226416 mm<\/td><td>5-25 kg<\/td><td>Small jobs, no power<\/td><td>Slow; operator fatigue<\/td><\/tr><tr><td><strong>Electric rebar cutter (GQ)<\/strong><\/td><td>Flywheel + clutch + 2.2-5.5 kW motor<\/td><td>\u226450 mm rebar, \u226455 mm round, 80\u00d780 angle<\/td><td>280-880 kg<\/td><td>Sites, plants, scrap yards<\/td><td>Needs 3-phase power<\/td><\/tr><tr><td><strong>Hydraulic rebar cutter<\/strong><\/td><td>Hydraulic cylinder + pump<\/td><td>\u226432 mm portable, \u226450 mm stationary<\/td><td>15-200 kg<\/td><td>Portable site work, low noise<\/td><td>Slower; hose maintenance<\/td><\/tr><tr><td><strong>Automatic rebar cutting machine (CNC)<\/strong><\/td><td>Servo feed + hydraulic shear<\/td><td>\u226416 mm typical<\/td><td>500-2,000 kg<\/td><td>Mass-production stirrup lines<\/td><td>High cost; complex setup<\/td><\/tr><\/tbody><\/table><figcaption class=\"wp-element-caption\">Rebar cutter type comparison: manual, electric, hydraulic, and CNC automatic<\/figcaption><\/figure>    <p class=\"wp-block-paragraph\">For 80% of construction and rebar processing buyers, the GQ series electric rebar cutter hits the best capacity-to-cost-to-maintenance balance. <\/p>    <p class=\"wp-block-paragraph\">Manual rebar cutters cap at 16 mm and exhaust operators within 2 hours. <\/p>    <p class=\"wp-block-paragraph\">Hydraulic rebar cutters are quieter and portable but typically cut 30-50% slower than the flywheel-driven GQ series. <\/p>    <p class=\"wp-block-paragraph\">Automatic rebar cutting machines only pay off above 5,000 cuts per day in a dedicated rebar plant.<\/p>   <div class=\"wp-block-image\"> <figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"720\" height=\"540\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/GQ32-rebar-cutting-machine-for-sale.webp\" alt=\"GQ32 rebar cutting machine for sale\" class=\"wp-image-4488\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/GQ32-rebar-cutting-machine-for-sale.webp 720w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/GQ32-rebar-cutting-machine-for-sale-16x12.webp 16w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><figcaption class=\"wp-element-caption\">GQ32 rebar cutting machine for sale<\/figcaption><\/figure> <\/div>   <h2 class=\"wp-block-heading\"><strong>Rebar Cutting Machine vs Rebar Shear: What Is the Difference?<\/strong><\/h2>    <p class=\"wp-block-paragraph\">Buyers often search for &#8220;rebar shear&#8221; or &#8220;rebar shears&#8221; interchangeably with &#8220;steel bar cutting machine.&#8221; They are different categories:<\/p>    <ul class=\"wp-block-list\"> <li><strong>Rebar cutting machine (GQ series)<\/strong>: Precision cutter producing clean, square ends on rebar, threaded rebar, and round bar. Built for length accuracy in rebar processing\u2014cuts 4-50 mm bar at 32 cuts\/min.<\/li>    <li><strong>Rebar shear \/ hydraulic alligator shear<\/strong>: High-throughput rough cutter for scrap metal, demolition, and baler feed lines. Cuts 30-200 mm bar at 6-12 cuts\/min and leaves variable-length, jagged ends.<\/li> <\/ul>    <p class=\"wp-block-paragraph translation-block\">Use a <strong>heavy-duty rebar cutter<\/strong> when cut length matters (e.g., 1,200 mm stirrup legs, threaded splice pre-cuts). Use a <strong>rebar shear<\/strong> when only rough downsizing matters (e.g., cutting 6 m scrap rebar to 1 m for a baler).<\/p>    <h2 class=\"wp-block-heading\"><strong>Rebar Cutting Machine Price Guide (Manual, Electric, Hydraulic Ranges)<\/strong><\/h2>    <p class=\"wp-block-paragraph\">Three price tiers cover the global construction rebar cutter machine for sale market:<\/p>    <ul class=\"wp-block-list\"> <li><strong>Manual rebar cutter<\/strong> (\u226416 mm): USD 80-250. Hand lever or hydraulic hand pump. Used by small contractors and DIY.<\/li>    <li><strong>Electric rebar cutter \/ GQ series<\/strong> (4-50 mm): USD 450-3,200. The most popular range for sites, plants, and scrap yards. GQ40\/GQ42 at USD 450-900, GQ45\/GQ50 at USD 1,200-2,200, GQ60 at USD 2,500-3,200.<\/li>    <li><strong>Automatic CNC rebar cutting machine<\/strong> (\u226416 mm, mass production): USD 8,000-25,000. Servo feed, programmable length, integrates with <a href=\"https:\/\/www.baler-machines.com\/ru\/rebar-arc-bending-machine\/\">CNC rebar bender<\/a> lines.<\/li> <\/ul>    <p class=\"wp-block-paragraph\">Price drivers: motor power, body weight (heavier = more cast iron = higher cost), blade material, voltage customization (220V civil variants add 5-8%), and packaging (plywood case vs. bare pack).<\/p>    <h2 class=\"wp-block-heading\"><strong>How to Operate a Rebar Cutting Machine Safely (5-Step SOP)<\/strong><\/h2>    <p class=\"wp-block-paragraph\">Standard operating procedure for the GQ series:<\/p>    <ul class=\"wp-block-list\"> <li><strong>Step 1 \u2014 Pre-start check<\/strong>: Confirm 380V 3-phase power, grounded outlet, gearbox oil level (if applicable), and blade gap (typically 0.5-1.0 mm for rebar under 25 mm). Confirm emergency stop functions correctly.<\/li>    <li><strong>Step 2 \u2014 Material positioning<\/strong>: Place rebar flat on the feed table against the length stop. For multiple-bar cuts, align bars within the rated diameter (e.g., 3\u00d7 12 mm for a GQ40 rated 25 mm).<\/li>    <li><strong>Step 3 \u2014 Cycle start<\/strong>: Press the foot pedal; the clutch engages and the flywheel delivers the cutting stroke in under 0.5 seconds. Keep both hands clear of the cutting zone.<\/li>    <li><strong>Step 4 \u2014 Cut inspection<\/strong>: Verify the cut end is flat (no bend or burr). A bent end signals a worn blade or wrong gap; a burr signals blade replacement is due.<\/li>    <li><strong>Step 5 \u2014 End-of-shift maintenance<\/strong>: Wipe the blade, lubricate the spring mount, check belt tension, and log the cut count. Replace the blade every 30,000-50,000 cuts depending on rebar grade.<\/li> <\/ul>   <div class=\"wp-block-image\"> <figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"720\" height=\"540\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/rebar-cutting-machine-working-scene.webp\" alt=\"rebar cutting machine working scene\" class=\"wp-image-4489\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/rebar-cutting-machine-working-scene.webp 720w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/rebar-cutting-machine-working-scene-16x12.webp 16w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><figcaption class=\"wp-element-caption\">rebar cutting machine working scene<\/figcaption><\/figure> <\/div>   <h2 class=\"wp-block-heading\"><strong>Why Choose Shuliy Rebar Cutting Machine (Manufacturer &amp; Supplier Direct)<\/strong><\/h2>    <p class=\"wp-block-paragraph\">Five reasons international buyers source their rebar cutter from Shuliy Factory directly:<\/p>    <ul class=\"wp-block-list\"> <li><strong>National-standard copper-winding motors<\/strong>: Every GQ model ships with 100% copper windings (2.2-5.5 kW). Aluminum-winding motors are common in low-cost competitors and fail within 6 months on heavy cuts.<\/li>    <li><strong>Customizable voltage<\/strong>: 380V\/50Hz standard; 220V\/415V\/480V\/60Hz available at no extra cost for OEM orders of 5+ units. Critical for civil-market 220V regions and 60Hz markets in the Americas and Saudi Arabia.<\/li>    <li><strong>2-year warranty<\/strong>: Covers motor, flywheel, blade, and gearbox. Wear parts (blade, spring) swap in 30 minutes with standard tools.<\/li>    <li><strong>FOB\/CIF\/DDP global shipping<\/strong>: The 280 kg GQ40 fits 24+ units in a 20GP container; the 880 kg GQ60 ships in 40HQ. We handle export documentation, CE certification, and commissioning videos.<\/li>    <li><strong>OEM \/ ODM \/ private label<\/strong>: Add your brand to the body, choose custom paint colors, and ship with a custom manual. MOQ 3 units for OEM.<\/li> <\/ul>   <div class=\"wp-block-image\"> <figure class=\"aligncenter size-full\"><img loading=\"lazy\" decoding=\"async\" width=\"720\" height=\"540\" src=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/heavy-duty-rebar-cutter-manufacturer-and-supplier.webp\" alt=\"heavy-duty rebar cutter manufacturer and supplier\" class=\"wp-image-4487\" title=\"\" srcset=\"https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/heavy-duty-rebar-cutter-manufacturer-and-supplier.webp 720w, https:\/\/www.baler-machines.com\/wp-content\/uploads\/2026\/08\/heavy-duty-rebar-cutter-manufacturer-and-supplier-16x12.webp 16w\" sizes=\"auto, (max-width: 720px) 100vw, 720px\" \/><figcaption class=\"wp-element-caption\">heavy-duty rebar cutter manufacturer and supplier<\/figcaption><\/figure> <\/div>   <h2 class=\"wp-block-heading\"><strong>Rebar Cutting Machine FAQ<\/strong><\/h2>   <div id=\"rank-math-faq\" class=\"rank-math-block\"> <div class=\"rank-math-list\"> <div id=\"faq-question-1786415058628\" class=\"rank-math-list-item\"> <h3 class=\"rank-math-question\">What size rebar can a GQ series machine cut?<\/h3> <div class=\"rank-math-answer\">  <p>GQ series machines cover 4-50 mm rebar across 8 models.<\/p>  <\/div> <\/div> <div id=\"faq-question-1786415074431\" class=\"rank-math-list-item\"> <h3 class=\"rank-math-question\">What is the difference between a GQ40 and a GQ45 rebar cutter?<\/h3> <div class=\"rank-math-answer\">  <p>The GQ40 has a 2.2 kW motor, 280 kg frame, and 25 mm threaded rebar capacity. The GQ45 has a 3 kW motor, 390-410 kg frame (depending on variant), and 32-36 mm capacity. <br \/>The GQ45&#8217;s 30 kg heavier frame absorbs cutting shock on 32 mm rebar better than the GQ40, extending blade life 40-60%. <br \/>For rebar under 25 mm, the GQ40 is the better value. For 28-32 mm rebar, the GQ45 is the minimum recommended model.<\/p>  <\/div> <\/div> <div id=\"faq-question-1786415152861\" class=\"rank-math-list-item\"> <h3 class=\"rank-math-question\">Can this machine cut threaded rebar for splice systems?<\/h3> <div class=\"rank-math-answer\">  <p>Yes, with the GQ45 or GQ50 straight-thread variant.<\/p>  <\/div> <\/div> <div id=\"faq-question-1786415215214\" class=\"rank-math-list-item\"> <h3 class=\"rank-math-question\">How fast does a rebar cutting machine cut?<\/h3> <div class=\"rank-math-answer\">  <p>All GQ series machines run at 32 cuts per minute in a continuous cycle.<br \/>Over an 8-hour shift with realistic operator rest breaks, that yields roughly 1,500-1,800 cuts of 32 mm rebar.<\/p>  <\/div> <\/div> <div id=\"faq-question-1786415254815\" class=\"rank-math-list-item\"> <h3 class=\"rank-math-question\">What voltage does a heavy-duty rebar cutter need?<\/h3> <div class=\"rank-math-answer\">  <p>Standard GQ series machines run on 3-phase 38oV \/50Hz industrial power.<br \/>For civil-market 220V single-phase use (small contractor, DIY, a 2.2 kW GQ40 can be rewound for 220V at no extra cost on OEM orders of 5+ units. <br \/>For 60Hz markets (Americas, Saudi Arabia, Philippines), 38oV\/60Hz or 415V\/60Hz is available.<br \/>Always confirm site voltage before ordering; a wrong-voltage motor burns out within hours.<\/p>  <\/div> <\/div> <div id=\"faq-question-1786415322087\" class=\"rank-math-list-item\"> <h3 class=\"rank-math-question\">How long does a steel bar cutting machine blade last?<\/h3> <div class=\"rank-math-answer\">  <p>A Cr12MoV blade on the GQ series lasts 30,000-50,000 cuts on HRB400 rebar under 32 mm, and 15,000-25,000 cuts on 40-50 mm HRB500 rebar. <br \/>Cutting harder grades (HRB600, quenched-tempered rebar) reduces blade life by 50%. Replacement takes 15-20 minutes with standard tools. <br \/>The spring mount extends blade life 30-50% over rigid-arm designs by absorbing the inertial impact that chips the cutting edge.<\/p>  <\/div> <\/div> <div id=\"faq-question-1786415387270\" class=\"rank-math-list-item\"> <h3 class=\"rank-math-question\">What is the difference between a rebar cutter machine and a rebar shear?<\/h3> <div class=\"rank-math-answer\">  <p>A rebar cutting machine (GO series) is a precision cutter that produces clean, square ends on rebar, threaded rebar, and round bar for length-accurate work like stirrup legs, threaded splice pre-cuts, and pilecage main bars. <br \/>A rebar shear (hydraulic alligator shear) is a high-throughput rough cutter for scrap metal, demolition, and baler feed lines that leaves variable-length, jagged ends. <br \/>Use the cutting machine when cut length matters; use the shear when only rough downsizing matters.<\/p>  <\/div> <\/div> <div id=\"faq-question-1786415523958\" class=\"rank-math-list-item\"> <h3 class=\"rank-math-question\">Can I use a rebar cutter to cut angle iron?<\/h3> <div class=\"rank-math-answer\">  <p>Yes, with the GQ40 (Angle Iron) variant. This model is specifically designed for 30&#215;30-80x 80 mm equal-legangle iron and replaces a bandsaw in many fabrication shops. The blade geometry and feed angle are optimized for angle rather than round bar.<\/p>  <\/div> <\/div> <\/div> <\/div>   <h2 class=\"wp-block-heading\"><strong>Order a Rebar Cutting Machine for Your Site or Plant<\/strong><\/h2>    <p class=\"wp-block-paragraph\">For a steel bar cutting machine configured to your rebar diameter, voltage, and throughput, contact our engineering team. <\/p>    <p class=\"wp-block-paragraph\">We ship the GQ series globally on FOB, CIF, or DDP terms; 8 models cover 4-50 mm rebar, 30\u00d730-80\u00d780 mm angle iron, and straight-thread splice systems. The 280 kg GQ40 fits 24+ units in a 20GP for LCL consolidation; the 880 kg GQ60 ships in 40HQ FCL. Custom voltage (220V single-phase, 415V, 480V, 60Hz), OEM branding, and a 2-year warranty are standard. Most quotes are returned within 24 hours.<\/p>","protected":false},"excerpt":{"rendered":"<p>GQ series rebar cutting machine (also sold as a steel bar cutter, rebar cutter machine, and heavy-duty rebar cutter): 8 models covering 4-50mm rebar and 30\u00d730-80\u00d780mm angle iron, 32 cuts\/min, 2.2-5.5kW motors, 280-880kg. Hydraulic, electric, and straight-thread variants for construction sites, rebar processing plants, and scrap yards.<\/p>","protected":false},"author":1,"featured_media":4480,"parent":0,"template":"","tags":[641,662,661,659,663,660],"product-type":[640],"class_list":["post-4478","product","type-product","status-publish","has-post-thumbnail","hentry","tag-rebar","tag-rebar-cutter","tag-rebar-cutter-machine","tag-rebar-cutting-machine","tag-steel-bar-cutter","tag-steel-bar-cutting-machine","product-type-rebar-processing-equipment"],"_links":{"self":[{"href":"https:\/\/www.baler-machines.com\/ru\/wp-json\/wp\/v2\/product\/4478","targetHints":{"allow":["GET"]}}],"collection":[{"href":"https:\/\/www.baler-machines.com\/ru\/wp-json\/wp\/v2\/product"}],"about":[{"href":"https:\/\/www.baler-machines.com\/ru\/wp-json\/wp\/v2\/types\/product"}],"author":[{"embeddable":true,"href":"https:\/\/www.baler-machines.com\/ru\/wp-json\/wp\/v2\/users\/1"}],"wp:featuredmedia":[{"embeddable":true,"href":"https:\/\/www.baler-machines.com\/ru\/wp-json\/wp\/v2\/media\/4480"}],"wp:attachment":[{"href":"https:\/\/www.baler-machines.com\/ru\/wp-json\/wp\/v2\/media?parent=4478"}],"wp:term":[{"taxonomy":"post_tag","embeddable":true,"href":"https:\/\/www.baler-machines.com\/ru\/wp-json\/wp\/v2\/tags?post=4478"},{"taxonomy":"product-type","embeddable":true,"href":"https:\/\/www.baler-machines.com\/ru\/wp-json\/wp\/v2\/product-type?post=4478"}],"curies":[{"name":"wp","href":"https:\/\/api.w.org\/{rel}","templated":true}]}}